|
|
 |
 |
Industrial
Supplies & Coatings |
|
|
Sprayon
Zinc-Rich Cold Galvanizing Compound
Sprayon
S00740 high-solids compound works like no other
anticorrosion spray for metal. It has been formulated
specifically for steel and wrought iron equipment
exposed to corrosive environments. Simply spray
S00740 as you would any aerosol coating. The epoxy-based
compound fuses zinc to the surface of the metal,
stopping rust by electrochemical action.
The zinc in S00740 preserves the strength of the
base metal, protecting the surface and extending
the life of the equipment. And unlike conventional
primers, Sprayon S00740 prevents rust creepage on
scratched areas. The result is a coating that provides
maximum protection against rust – protection
that is equal to or better than hot-dipped galvanizing.
In a side-by-side comparison, our side wins.
Both of these metal samples were subjected to 1,575
hours of salt spray after treatment with zinc-rich
coatings. The Sprayon S00740 sample on the left
shows no sign of corrosion, while the Crown 7007
sample shows signs of rust creepage.
Sprayon S00740's unique formulation makes it the
best coating you can buy for metal exposed to the
elements. It protects your equipment from the adverse
effects of extreme heat and cold, salt,dirt, precipitation
and more. Plus, it goes on easy, without clogging
or running, and dries fast. |
 |
 |
| Sprayon
S00740 Zinc-Rich
Cold Galvanizing Compound |
Crown
7007
Zinc-Rich Primer |
|
|
For
all kinds of equipment, all kinds of conditions.
Sprayon S00740 has been developed for use on surfaces
subject to the most severe corrosion conditions,
including metal fences, gutters, bridges, automobiles,
structural steel, damaged galvanized surfaces,
marine equipment, farm equipment and wrought iron.
It is also ideal for use as a maintenance spray
for highway work, power plants, refineries and
more.
-
STOPS RUST
Highly resistant to salt corrosion and water;
resists rust creep.
-
DRIES FAST
Dries to the touch in less than 15 minutes;
can be recoated within hours.
-
COVERS IN ONE COAT
May be topcoated with conventional metal primers/finish
coats.
-
WON'T SAG
Excellent anti-sag and anti-setting properties
-
HIGH-DELIVERY VALVE
Provides uniform spray with no clogging.
-
MEETS MIL SPECS
Meets or exceeds performance requirements for
MIL-P-26915C.
|
|
|
|
|
